Main menu

Skip to primary content
Skip to secondary content
  • HOME
  • MMS Inspection®
  • COATING THICKNESS
    • Instruments With Cable Probes
    • Corrosion Instruments With Integrated Probes
    • Instruments For Thermal Spray Aluminum
    • Instruments for Intumescent Coatings
    • Wet Film Gauge
  • SURFACE PROFILE
  • POROSITY
  • SOFTWARE
  • CONTACT

Image navigation

← Previous Next →

FPR1 RS1351_Sonde_CMScope 4307_1-2014_Spieg heller

Published September 8, 2015 at 1019 × 441 in SURFACE PROFILE

NEW Surface Profile Probe

Achieve quick, accurate, and repeatable measurements with the NEW Surface Profile Probe from Fischer Technology

Surface preparation of substrates is essential before applying any coating. Measuring and recording the peak to valley profile is a key factor in the adhesion process. Achieve quick, accurate, and repeatable measurements with the NEW Surface Profile Probe from Fischer Technology.

Measure According to SSPC-PA2

Measure According to SSPC-PA2

The FISCHER handheld coating thickness family of instruments complies fully with SSPC-PA2, including the ability to transfer measured data to industry and customer specific report templates.

Porosity Testing of Coatings

Porosity Testing of Coatings

Ensuring the long term protection of parts exposed to the extremely harsh conditions found in offshore environments and pipelines requires intact anti-corrosion coatings. Any void, gap or pore in the coating can shorten the lifetime of protected components. To control the quality of these crucial coatings, porosity testing is mandatory.